Product Details:
Payment & Shipping Terms:
|
Name: | Three Wavy Washers | Size: | 5mm-1000mm |
---|---|---|---|
Non-standards: | OEM Is Available If You Provide A Drawing Or Sample | Sample: | Free(If There Is Ready-made Goods) |
Product Standards: | GB,DIN,BS,ISO,JIS,ANSI,UNC | Packing: | Inner--PE Bag; Outer--Carton Box |
High Light: | Custom Three Wavy Washers Spring,OEM Wavy Washers Spring,Coil Spring Size 5mm |
Custom three wavy washers wave spring vs coil spring Size 5mm-1000mm
Description:
Wave springs are precise flat wire compression springs that fit into assemblies where space is at a premium. Since the overall lengths and operating heights of wave springs are lower than those of conventional round wire springs, they will often reduce the size of the spring cavity by as much as 50%. Of course, this will also reduce the weight and raw material cost of the assembly.
Specification:
Part No. | Operates in Bore Diameter |
Lears Shaft Diameter |
Load | Work Height | Free Height | Waves | Thinkness | Radial Wall | Spring Rate | Open mode |
mm | mm | (N) | mm | mm | mm | mm | N/MM | |||
LB-0035 | 9 | 6.86 | 25.8 | 1 | 1.5 | 3 | 0.2 | 0.81 | 52 | overlap |
LB-0039 | 10 | 7.49 | 27.6 | 1 | 1.57 | 3 | 0.2 | 1.02 | 48 | overlap |
LB-0043 | 11 | 8.46 | 29.4 | 1 | 1.83 | 3 | 0.2 | 1.02 | 35 | overlap |
LB-0047 | 12 | 9.17 | 33.4 | 1 | 1.57 | 3 | 0.25 | 1.17 | 59 | overlap |
LR-0050 | 12.7 | 9.91 | 31.12 | 1.27 | 2.16 | 3 | 0.2 | 1.02 | 35 | overlap |
LB-0051 | 13 | 9.53 | 37.8 | 1 | 1.57 | 3 | 0.25 | 1.47 | 66 | overlap |
LR-0062 | 15.88 | 12.19 | 44.45 | 1.27 | 2.41 | 3 | 0.25 | 1.47 | 38.85 | overlap |
JBT-016 | 16 | - | 60-100 | 1 | 1.9 | 3 | 0.3 | 1.83 | - | overlap |
LB-0063 | 16 | 11.28 | 44.5 | 1.57 | 2.29 | 3 | 0.25 | 1.98 | 65 | overlap |
JBT-019 | 19 | - | 70-110 | 1 | 2 | 3 | 0.33 | 2.01 | - | overlap |
LB-0075 | 19 | 14.28 | 53.4 | 1.57 | 3.05 | 3 | 0.25 | 1.98 | 35 | overlap |
LR-0075 | 19.05 | 12.7 | 62.23 | 1.57 | 4.06 | 3 | 0.25 | 1.98 | 25.03 | overlap |
... | ... | ... | ... | ... | ... | ... | ... | ... | ... | ... |
LR-1500 | 381 | 358.9 | 1022.41 | 3.96 | 8.89 | 12 | 0.81 | 9.53 | 207.55 | gap |
LB-1535 | 390 | 369.16 | 1072.4 | 3.96 | 9.14 | 10 | 1.07 | 9.53 | 211 | gap |
LR-1550 | 393.7 | 371.86 | 1062.42 | 3.96 | 7.87 | 13 | 0.81 | 9.53 | 271.6 | gap |
LB-1575 | 400 | 379.16 | 1099.1 | 3.96 | 9.65 | 10 | 1.07 | 9.53 | 196 | gap |
LR-1600 | 406.4 | 384.56 | 1102.43 | 3.96 | 8.64 | 13 | 0.81 | 9.53 | 235.9 | gap |
LB-1614 | 410 | 382.82 | 1125.8 | 3.96 | 8.38 | 10 | 1.07 | 12.7 | 251 | gap |
LB-1654 | 420 | 392.82 | 1152.5 | 3.96 | 8.89 | 10 | 1.07 | 12.7 | 233 | gap |
LB-1693 | 430 | 402.82 | 1179.2 | 3.96 | 7.62 | 11 | 1.07 | 12.7 | 317 | gap |
LB-1732 | 440 | 412.82 | 1205.9 | 3.96 | 8.13 | 11 | 1.07 | 12.7 | 295 | gap |
LB-1811 | 460 | 432.82 | 1263.7 | 3.96 | 8.89 | 11 | 1.07 | 12.7 | 256 | gap |
LB-1890 | 480 | 452.82 | 1317.1 | 3.96 | 8.13 | 12 | 1.07 | 12.7 | 318 | gap |
LB-1969 | 500 | 472.82 | 1370.5 | 3.96 | 8.89 | 12 | 1.07 | 12.7 | 280 | gap |
LB-2126 | 540 | 512.82 | 1481.8 | 3.96 | 8.89 | 13 | 1.07 | 12.7 | 303 | gap |
LB-2284 | 580 | 552.82 | 1593 | 3.96 | 8.89 | 14 | 1.07 | 12.7 | 327 | gap |
Factory introduction:
The company has successfully passed ISO9001 and IATF16949 quality management system certification. Our wave springs and spiral retaining rings are mainly used in aerospace, automobile, petroleum, medical equipment, wind energy, construction machinery, consumer electronics and other industrial products .
Contact Person: Mrs. Janet
Tel: 0086-18957716162
Fax: 86-577-62606162
C Series Multi Turn Wave Springs - Inch Plain ends
Nested Wave Springs Multi Turn Wave Springs - Inch Plain ends
LS Series Wave Springs Inch Linear Springs
Custom Stainless Steel Linear Wave Springs for Toys , Size 5mm-1000mm
Square Wire Constant Section Retaining Rings With Radial Pinch Installation / Removal Provisions
Rectangle Section Wire Snap Rings For Automotive OEM / ODM Available
No Custom Tooling Charges Wire Snap Ring With ISO9001 TS16949 Certificate